Molding Router Bit
Thank you for visiting our site! If you are looking for information about a Molding Router Bit, you have come to the right place.
Do face moulding router bits come in 1/4″ shanks?
I recently purchased a Ryobi table router, and not really knowing anything about the whole process, bought some bits at the store as well. Well, turns out the collet is 1/4″, whereas the shanks are 1/2″ thick that I am looking to use. I have looked online and am starting to believe that face moulding bits do not come in 1/4″ shanks, although I’m hoping someone else can tell me otherwise.
Also, I’m hoping for the width of the moulding to be around 2″ thick (I know, most are 2 1/4″). Does anyone have any suggestions?
Most routers allow the user to change collets, so try looking for a 1/2″ collet for your particular router. The manufacturer likely would be able to supply the part. In the long run, it’s much better to have two collets (or even more) since it gives you more flexibility and more choices when it comes to buying bits.
As far as 1/4″ shanks go, they typically are featured only on bits under about 1″ in length, and not on any pattern that requires a deep cut. Here are two molding bit that may match your needs. Models 91811 and 91859 are 1″ high:
http://www.rockler.com/product.cfm?page=2141&filter=moulding%20router%20bit
http://www.rockler.com/product.cfm?page=5308
If a 1/2″ collet is not available, one possibility for making a 2″ molding with these bits would be to run each piece twice, creating a mirrored image of the first pass. Simply flip your piece over and run the bearing along the same strip of wood used on the first pass. As always, take off a little bit at a time. This is true also of 1/2″ shank bits. Your cut will be smoother and you’ll save time on sanding.
Here is a selection of other bits that you can browse through:
http://www.rockler.com/search_results.cfm?CatExpand=Router%20Bits&OrigCatPath=All+Products%2F%2F%2F%2FUserSearch1%3Dmoulding+router+bit%2F%2F%2F%2FRouters+and+Accessories&fp=All+Products%2F%2F%2F%2FUserSearch1%3Dmoulding+router+bit%2F%2F%2F%2FRouters+and+Accessories&filter=moulding%20router%20bit
Hope this helps, and happy woodworking!
Here are some excellent bargains on ebay for Molding Router Bit
|
|
5X 1/2″ Specialty Molding OGEE Tungsten Router Bits New Woodworking Shop Bit New $59.49 |
|
|
2 pc 1/2″ SH Wide 5-1/2″ Long Ceiling Crown Molding Router Bit Set $44.00 |
|
|
2 pc 1/2″ SH Reversible Crown Molding Router Bit Set $35.00 |
|
|
1 pc 1/2″ Shank Reversible Crown Molding B Router Bit $18.00 |
|
|
1 pc 1/2″ Shank Specialty Molding E Router Bit $18.25 |
|
|
1 pc 1/2″ SH Specialty Face Molding Router Bit $16.25 |
|
|
5 PC 1/2″ Specialty Molding Carbide Router Bit Panel Raise Door Stile Ogee Bits $57.25 |
|
|
5pc 1/2″ Carbide ROUTER MOLDING BIT SET with WOOD CASE cut shaper mold cabinet $59.99 |
|
|
Freud 99-014 Molding Router Bit with 1/2-Inch Shank NEW $49.99 |
|
|
Freud 99-015 1-1/16-Inch Face Molding Router Bit $45.09 |
|
|
3 PC ELITE BASEBOARD & MOLDING ROUTER BIT SET 1/2 SHANK $56.05 |
|
|
CMT ROUTER BIT MOLDING CUTTER 855.902.11 1/2 SHANK $54.53 |
|
|
CMT ROUTER BIT MOLDING CUTTER 856.501.11 1/2 SHANK $63.44 |
|
|
CMT ROUTER BIT MOLDING CUTTER 856.802.11 1/2 SHANK $84.37 |
|
|
AMANA ROUTER BIT#54220-ARCHITECTURAL MOLDING BIT- 2/FLUTE-W/BEARING-1/2″ SHANK $35.00 |
|
|
CMT 855.901.11 Molding Router Bit $52.96 |
|
|
Multi Molding Router Bit 1/2 x 1-1/4 $5.27 |
|
|
2 pc 1/2″ SH 2-5/16″ Long Crown Molding Router Bit Set $34.00 |
|
|
1 PC 1/2″ SH 2-5/16″ Long Crown Molding A Router Bit $16.50 |
|
|
1 PC 1/2″ SH 2-5/16″ Long Crown Molding B Router Bit $16.50 |
|
|
1 PC 1/2″ SH Door & Window Casing Molding Router Bit $22.00 |
|
|
Freud 95-100 5pc Cabinet & Molding Router Bit Set (New in Box) $189.00 |
|
|
Porter Cable 43552PC 1-1/4″ Diameter Crown Molding Carbide Tipped Router Bit NEW $55.57 |
|
|
1 pc 1/2″ Shank Crown Molding Angle 52°/38° Router Bit $20.00 |
|
|
1 PC 1/2″ Shank Picture Frame Beaded Molding Router Bit $14.00 |
|
|
5 pc 1/2″ Shank Specialty Molding #1 Router Bit Set $45.00 |
|
|
1 pc 1/2″ Shank Specialty Molding E Router Bit $13.50 |
|
|
1 PC 1/2″ SH Chair Rail Molding Router Bit for #390 $22.00 |
|
|
1 pc 1/2″ Shank Specialty Molding B Router Bit $13.00 |
|
|
1 pc 1/2″ Shank Specialty Molding C Router Bit $13.50 |
|
|
1 pc 1/2″ SH Side Edge Handrail Molding Router Bit $14.00 |
|
|
5 pc 1/4″ SH Top Bearing Pattern Molding Router Bit Set $39.00 |
|
|
1 pc 1/2″ Shank French Provincial Molding Router Bit $13.50 |
|
|
1 pc 1/2″ SH Specialty Face Molding Router Bit $13.00 |
|
|
1 PC 1/2″ SH Window Brick Molding Router Bit for #180 $21.00 |
|
|
1 pc 1/2″ Shank Multi Edging Molding Router Bit $9.50 |
|
|
5 pc 1/2″ SH Face Specialty Molding #2 Router Bit Set $48.00 |
|
|
Mitered door Molding Router Bit – Yonico 16166 $24.95 |
|
|
1-pc 1/2″ SH Horizontal Crown Molding Round Router Bit $19.00 |
|
|
1 PC 1/2″ SH Base Architectural Molding A Router Bit $17.50 |
|
|
1 PC Shutter Base Architectural Molding C Router Bit $16.00 |
|
|
NEW FREUD 93-200 ARCHITECTURAL MOLDING ROUTER BIT 6PC SET WOODEN BOX 1/2″ SHANK $159.99 |
|
|
1 pc 1/2″ SH 3″ Long Blade Lower profile Wide Crown Molding Router Bit $22.00 |
|
|
CMT 863.080.11 Cavetto Edge Mold Router Bit, NEW $34.99 |
|
|
1 pc 1/2″ SH 3″ Long Blade Upper Profile Wide Crown Molding Router Bit $22.00 |
|
|
CMT 855.901.11 Molding Router Bit 1/2″ Shank, NEW $53.99 |
|
|
Amana 54400 Crown Molding Bit 1/2″ Shank $101.17 |
|
|
Architectural Molding Router Bit – Yonico 16132 $19.95 |
|
|
Crown Molding Router Bit Extender – Yonico 16142 $22.95 |
|
|
1 1/16″ Freud Face Molding Router Bit Set 99-015 $41.99 |
|
|
5pc 1/2″ Carbide ROUTER MOLDING BIT SET with WOOD CASE cut shaper mold cabinet $59.99 |
|
|
Mitered Door Router Bit Set- Frames & Molding Bit – 12230 $39.95 |
|
|
Raised Panel Cabinet Door Router Bit Set – 5 Bit w/ Multi Form Molding Bit 12536 $74.95 |
|
|
Flute & Bead Molding Router Bit – 16145 $15.95 |
|
|
Picture Frame and Molding Router Bit – Large – 16164 $16.95 |
|
|
Architectural Molding Router Bit – 16140 $15.95 |
|
|
Architectural Molding Router Bit – 16139 $16.95 |
|
|
Large Reversible Crown Molding Router Bit – 16150 $22.95 |
|
|
Elaborate, Large Crown Molding Router Bit Profile 16148 $22.95 |
|
|
Architectural Molding Router Bit – 16134 $16.95 |
|
|
Architectural Molding Router Bit – 16133 $19.95 |
|
|
Multiform Multi-Profile Molding Router Bit 16155 $25.95 |
|
|
10 bits Architectural Molding Router Bit Set – 16101 $104.95 |
|
|
5 Bit Specialty Molding Router Bit Set – 16540 $64.95 |
|
|
Architectural Molding Router Bit – 16138 $17.95 |
|
|
Architectural Molding Router Bit – 16136 $14.95 |
|
|
Architectural Molding Router Bit – 16131 $17.95 |
|
|
Architectural Molding Router Bit – 16135 $18.95 |
|
|
Architectural Molding Router Bit – 16137 $15.95 |
|
|
Architectural Base Molding Router Bit – 16130 $18.95 |
|
|
Triple Flute Molding Router Bit – 16160 $15.95 |
|
|
Pedestal Base & Small Furniture Molding Router Bit – 16157 $18.95 |
|
|
Triple Bead/ Column Molding Router Bit – 16159 $14.95 |
|
|
Crown Molding Router Bit – 16152 $21.95 |
|
|
8 PC ELITE MOLDING AND PICTURE FRAME ROUTER BIT SET 1/2” SHANK 81-008PF $99.00 |
|
|
3 PC BASEBOARD & CROWN MOLDING ROUTER BIT SET 1/2” SHANK 81-003M $59.00 |
|
|
Bosch Router Bit Cove edge Molding Woodworking 1/4″ New $7.95 |
|
|
Molding and picture frame router bit, 1/2″ shank 81-00807PF $9.99 |
|
|
Molding router bit, 1/2″ shank 81-00801PF $24.99 |
|
|
Molding and picture frame router bit, 1/2″ shank 81-00804PF $24.99 |
|
|
Molding and picture frame router bit, 1/2″ shank 81-00802PF $14.99 |
|
|
Molding and picture frame router bit, 1/2″ shank 81-00803PF $17.99 |
|
|
Molding and picture frame router bit, 1/2″ shank 81-00806PF $14.99 |
|
|
Molding and picture frame router bit, 1/2″ shank 81-00808PF $7.49 |
|
|
5 PC 1/2″ SPECIALTY MOLDING CARBIDE ROUTER BIT PRO SET $57.99 |
|
|
Freud 99-484 Base Molding Ogee Router Bit (1/2″ Shank) $46.99 |
|
|
Freud 99-414 Wide Crown Molding Router Bit (1/2″ Shank) $73.49 |
|
|
Freud 99-415 Wide Crown Molding Router Bit (1/2″ Shank) $73.49 |
|
|
Freud 93-200 6 Piece Architectural Molding Router Bit S $399.99 |
|
|
Freud 99-416 Wide Crown Molding Router Bit (1/2″ Shank) $73.49 |
|
|
Freud 99-417 Wide Crown Molding Router Bit (1/2″ Shank) $73.49 |
|
|
Freud 99-418 Wide Crown Molding Router Bit (1/2″ Shank) $73.49 |
|
|
Freud 99-419 Wide Crown Molding Router Bit (1/2″ Shank) $73.49 |
|
|
Freud 99-460 Brick Molding Architectural Router Bit (1/ $88.99 |
|
|
5X 1/2″ SPECIALTY MOLDING OGEE TUNGSTEN ROUTER BITS NEW $59.95 |
|
|
Multi Profile Molding Maker, Carbide Router Bit, 1/2 shank USA VERMONT AMERICA $19.95 |
|
|
1 pc 1/2″ Shank Reversible Crown Molding A Router Bit $17.00 |
|
|
GRIZZLY WOOD SHAPER MOLDING ROUTER 1/4″ TONGUE & GROOVE CARBIDE CUTTER BIT SET $59.95 |
|
|
NEW Router Bit Face Molding Ea. ROUTER BITS – 1/2 IN CARBIDE 99-015 $58.62 |
|
|
Porter Cable 43543PC Cove & Bead Face Molding 2 Flute Forming Router Bit NEW $32.87 |
And a few more great deals on Amazon:
|
|
Freud 99-036 Adjustable Tongue and Groove Router Bit Set, 1/2-Inch Shank $62.52 An industry leader for over 50 years, the Freud name equals quality, precision and craftsmanship. Freud router bits feature Freud made TiCo Hi-Density Carbide for maximum cutting life. Each bit is individually balanced, giving a cut above the rest. Trim carpenters, remodelers, and woodworking enthusiasts can now mill molding of almost any size, shape and configuration to add beautiful detail to … |
|
|
Freud 20-301 Radius V-Groove Router Bit for Freud’s 99-472 Beadboard Router Bit System, 1/4-Inch Shank $17.17 An industry leader for over 50 years, the Freud name equals quality, precision and craftsmanship. Freud router bits feature Freud made TiCo Hi-Density Carbide for maximum cutting life. Each bit is individually balanced, giving a cut above the rest. Use the solid carbide beadboard v-groove bit to complete the beadboard design…. |
|
|
MLCS 8384 Round Over-Beading Router Bit 4-Piece Boxed Set $29.95 … |
Crown Molding Angle Router Bit
Tags: base molding router bits, bit, crown molding router bits, freud crown molding router bits, kitchen, molding, molding router bits, router, t molding router bit, woodworking