Length Drill
Thursday, December 23rd, 2010 Welcome to Center Bits!
Thank you for visiting our site. If you are looking for information about a Length Drill, you have come to the right place.
Bard Ventures 2007 Drilling Ends on a High Note, 2008 Drilling Continues
Bard Ventures (TSX.V:CBS) recently completed two phases of drilling 23 on its Lone Pine Property near Houston in northwestern British Columbia.
The best hole in that program, (assays are still pending for the remainder of Phase 2) was a 12 meter intersection grading 0.27 % Molybdenum, confirming the presence of higher grade concentrations within a lower grade disseminated body. (0.1% Molybdenum is equal to 2 lbs. per short ton).
Other highlights from the program include:
Phase I highlights:
• BD-07-01 returned 0.05% MoS2 over the entire length of 490.10 metres, which included two higher grade zones of 0.078% MoS2 over 42.9 m from 17.0 m to 59.9 m and 0.081% MoS2 over 102.3 metres from 257.7 m to 360.0 m.
• BD-07-02 returned 0.07% MoS2 over the entire 489.4 meters, including a 231.4 meter interval of 0.095% MoS2.
• BD-07-03 intersected higher grade intervals in excess of 12 meters at 0.27% MoS2.
Phase II highlights:
Granby Zone:
A single drill hole was designed for the Granby Zone and this drill hole was to twin the 1978 historical percussion hole M-3 which returned 0.176% Mo (0.29% MoS2) over 36.6m. Drill hole BD-07-11encountered altered dioritic rocks through to 122.0m before being shutdown due to extreme blocky conditions and faulted corridors that made drilling too difficult. BD-07-12 was then targeted 10m to the north of the M-3 historical collar and drilled to a depth of 254.0m. Drilling intersected altered hornfels and intercalated dioritic rocks with visible molybdenum observed in quartz veining and within the matrix of the brecciated corridors. Assays are pending.
This area will be revisited in the new year to better delineate the faulted corridor in and around M-3 and BD-07-11 and the associated lineament expressed in the geophysical data.
Alaskite Zone:
Thirteen holes were drilled in the Alaskite Zone during the second phase of drilling between September and December 2007. Drill holes BD-07-08, 07-09, 07-13, 07-14, 07-15, 07-16, 07-17, 07-18, 07-19, and BD-07-20 targeted IP chargeability and resistivity anomalies that showed potential for molybdenum mineralization. Drill holes BD-07-21 and BD-07-23 targeted geophysical magnetic anomalies associated with the alaskite intrusive. A pattern of testing these anomalies was based around historical geophysical data and historical trenching and drilling data as well the favorable assay results returned in drillhole BD-07-01.
All of the above mentioned drill holes encountered variable amounts of visible molybdenum throughout their entire drill lengths, in particular drill holes BD-07-09, BD-07-13, BD-07-15, BD-07-16, BD-07-21 and BD-07-23. Drill holes 07-15 and 07-16 targeted the northwest trending alaskite intrusive that was originally mapped on surface in 1969. Both drill holes encountered >100 meters of mineralized alaskite and favorable quartz veining that extended into the underlain hornfels andesites. These drill holes have continued to confirm the northwest strike to the Alaskite intrusive.
Drill holes 07-09 and 07-13 were drilled ~100m north of BD-07-01 and were testing an IP anomaly outside of the known alaskite intrusive. Both drill holes exhibited moderate to strong fracturing throughout their lengths and moderate quartz veining throughout. Both drill holes were shutdown in a coarse grained intrusive rock. Assays are pending for BD-07-13, BD-07-15 and BD-07-16.
Drill holes BD-07-21 and BD-07-23 were designed as angle holes to better delineate the alaskite intrusive and provide better geological information regarding the width and depth of the alaskite intrusive. BD-07-21 intersected 93 metres of alaskite with favorable veining and molybdenum mineralization, while BD-07-23 intersected 344 metres of alaskite from collar to the end of the hole with very encouraging intense veining and visible molybdenum throughout the entire hole length.
Drill hole BD-07-22 was designed to target the eastern granitic pluton approximately 100 meters east of BD-07-09. The BD-07-09 drill pad was used for this drill hole, and the drill was turned to an azimuth of 090 and drilled at an angle of -45 dip. Hornfels and intrusive were intersected where anticipated, thus adding to the current geological model that this eastern pluton has a strike that mimics the western alaskite intrusive to the southwest.
Mid Zone
Drill hole BD-07-10 was drilled to the northeast of the Alaskite Zone, on the road between the Alaskite Zone and the Granby Zone. It too was situated on a broad geophysical anomaly and encountered molybdenum mineralization hosted in vertical quartz veinlets within a dioritic intrusive below 250 meters.
Summary
An extensive drill program is planned for the new year and drilling will follow up on many of the favorable drill holes to date, in particular the drill holes intersecting the alaskite intrusive in and around drill hole BD-07-15 and BD-07-23. Drilling of the Quartz Breccia Zone will also commence in the new year as road conditions are at their best and follow up on the anomalous areas around BD-07-02 is a priority.
Exploration or mining activities have been conducted on and around the area of the Lone Pine Claims since early in the last century, with a considerable amount of geological, geophysical, and geochemical work having been done on the Property since 1976. A number of different companies have worked on the Property previously, including Canex Aerial Exploration Ltd., Molymines Exploration Limited, Cominco Ltd., Granby Mining Company and Noranda Mining and Exploration Inc. Several programs of diamond and reverse circulation drilling have been conducted on the Property since the mid seventies; the most notable of which was the program in 1978 where a hole drilled in the Quartz Breccia Zone returned 356.3 meters of 0.068% MoS2 from 20.7 to 377 meters which includes 154 meters of 0.088% MoS2 from 181 to 335 meters.
Additionally, a second deeper diamond drill hole drilled during this program, which was drilled in the Alaskite Zone, returned 343.7 meters of 0.06% MoS2 from 3.6 to 352.3 meters, including 101.4 meters of 0.078% MoS2 from 3.6 to 105 meters. Both of the above drill holes were terminated in mineralization. However, for the most part, past programs tended to be fairly limited in scope, with most drilling being confined to probing shallowly beneath known surface mineralization, and no effort has ever been made to determine whether there is any lateral continuity to mineralization noted above, or whether higher grade mineralization exists nearby which correlates to the mineralization noted to occur in these two drill holes which were drilled approximately one kilometer apart.
About the Author
Resourcex Investor is an internationally distributed newsletter about emerging junior resource companies. Sign up for a free 1-month trial to our newsletter and get instant access to news and investing tips that have helped many of our readers make more money. http://www.resourcex.com
Here you can find Length Drill items on Ebay:
|
|
35cm Length 14mm Shank 18mm Tip Masonry Drill Bits $10.28 |
|
|
12Pc Pack #15 HSS Jobber Length Drill Bits 118° Pt $10.69 |
|
|
6mm Dia SDS Plus Shank 110mm Length Spiral Drilling Bit $5.25 |
|
|
230mm Length 20mm Dia Auger Drill Bit for Woodworking $9.90 |
|
|
KnKut 27/64″ Jobber Length Drill Bit KNKKK5-27/64 $11.59 |
|
|
16mm Diameter 160mm Length Twist Masonry Drill Bit $5.56 |
|
|
Vermont American 3/16″ High Speed Steel Extension Length Drill Bit 13162 $6.99 |
|
|
Masonry Hammer Stone 110mm Length Spiral Drilling Bit $5.23 |
|
|
Vermont American 7/16″ High Speed Steel Extension Length Drill Bit 13278 $12.99 |
|
|
Vermont American 7/32″ High Speed Steel Extension Length Drill Bit 13164 $7.35 |
|
|
160mm Length SDS Plus Shank Hammer Masonry Drill Bit $5.56 |
|
|
30mm Length 10mm Diameter Masonry Carbide Drill Bits $6.56 |
|
|
Hitachi 3/8″ Black Shield 135° Split Point Extended Length Drill Bit $15.00 |
|
|
KnKut 7/16″ Jobber Length Drill Bit KNKKK5-7/16 $10.15 |
|
|
235mm Length Flute Hammer Drill Bit for Concrete Stone $11.45 |
|
|
7cm Length Gray HSS 3.7mm Twist Drill Bit Tip 10 Pcs $4.52 |
|
|
Vermont American 1/4″ High Speed Steel Extension Length Drill Bit 13166 $7.57 |
|
|
5/16″ Fractional Sized 135° Split Point Jobber’s Length High Speed Drill Bit $6.56 |
|
|
10 Pcs 1.6mm Diameter 42mm Length Mini Twist Drill Bit $8.54 |
|
|
12″ Brad Point Drill Bit Set Extra Length 1/8 3/16 1/4 5/16 3/8 7/16 & 1/2 inch $7.49 |
|
|
12″ Brad Point Drill Bit Set & Stop Collars , Extra Long Length in 1/8-1/2 inch $13.49 |
|
|
12″ Brad Point Drill Bit Set , Extra Long Length 1/8 3/16 1/4 5/16 3/8 7/16 1/2 $8.99 |
|
|
SDS Plus Shank Concrete Hammer Drill Bit 160mm Length $4.09 |
|
|
Carpenter 230mm Length 16mm Dia Auger Drill Bit Cutter $8.42 |
|
|
100mm Flute Length 12.5mm Dia Helix HSS Twist Drill Bit $5.02 |
|
|
Vermont American 1/2″ High Speed Steel Extension Length Drill Bit 13282 $14.99 |
|
|
35mm Length Spiral Flute Stone Masonry Hammer Drill Bit $4.17 |
|
|
Greenfield 12pcs Jobber Length #13 Twist Drill Cobalt $17.99 |
|
|
Precision USA 12pcs Jobber Length #14 Twist Drill Bits $13.99 |
|
|
Precision USA 12pcs Jobber Length #17 Twist Drill Bits $13.99 |
|
|
Precision USA 12pcs Jobber Length #35 Twist Drill Bits $13.99 |
|
|
Precision USA 12pcs Jobber Length #57 Twist Drill Bits $13.99 |
|
|
Qualtech 12pcs Jobber Length Black #28 Twist Drill Bits $13.99 |
|
|
Qualtech 12pcs Jobber Length Black #49 Twist Drill Bits $13.99 |
|
|
Titan USA 12pc Stub length 10 Screw Machine Twist Drill $13.99 |
|
|
Titan USA 12pcs Jobber Length #1 Black Twist Drill Bits $15.99 |
|
|
CHICAGO-LATROBE 46101* DRILL BIT, #31, JOBBER LENGTH, 118 DEGREE POINT 77967 $13.00 |
|
|
CLE-LINE C07876 DRILL BIT, LETTER SIZE K, FLUTE LENGTH 2-15/16″ 91624 $2.00 |
|
|
Masonry 14mm Width Tip 146mm Length Spiral Drill Bit $6.70 |
|
|
CHICAGO-LATROBE 48721* SCREW MACHINE LENGTH DRILL BIT, DRILL SIZE: #21 14106 $2.00 |
|
|
Carpenter 230mm Length 18mm Cutting Dia Auger Drill Bit $10.31 |
|
|
160mm Length SDS Plus Shank Hammer Masonry Drill Bit $6.53 |
|
|
4 Drill Bit 8.9 PTD HS Bits Length 3 In Nose End 1/8 In $7.00 |
|
|
340mm Length SDS Plus Shank Drilling Bit for Concrete $10.23 |
|
|
#61 to #80 Jobbers Length High Speed Drill Bit Set $10.99 |
|
|
Wood Cutting 230mm Length 24mm Diameter Auger Drill Bit $13.97 |
|
|
Jobbers Length Twistet Drill Set $29.99 |
|
|
10 Pcs 1.6mm Diameter 42mm Length Mini Twist Drill Bit $9.12 |
|
|
7) Triumph 1/2″ Drill Bits Jobber Length USA Made New $18.00 |
|
|
110mm Length 35mm Length Spiral Flute Masonry Drill Bit $3.73 |
|
|
Woodworking 150mm Twist Length 10mm Dia Auger Drill Bit $6.59 |
|
|
4.8″ Flute Length 16mm Tip Width Hammering Drill Bit $11.12 |
|
|
90mm Flute Length 10.5mm Dia Helix HSS Twist Drill Bit $4.36 |
|
|
6 ~ ~ ~Barnes 1/8 Jobber Length Duralloy Drill Bit $9.99 |
|
|
110mm Length Twist Drill Bit for Masonry Concrete Stone $4.99 |
|
|
255mm Flute Length 16mm Tip Width Hammering Drill Bit $13.83 |
|
|
KnKut 15/32″ Jobber Length Drill Bit KNKKK5-15/32 $13.89 |
|
|
50 Aircraft Drill Bits – 3/16″ step drills sharp 6″ Length $21.59 |
|
|
255mm Flute Length 16mm Tip Width Hammering Drill Bit $13.83 |
|
|
8″ Length – 1/4″ Heavy Duty Masonry Drill $11.75 |
|
|
KnKut 3/16″ Jobber Length Drill Bit KNKKK5-3/16 $5.94 |
|
|
16mm Width Tip Concrete Hammer Drill Bit 160mm Length $6.56 |
|
|
10PCS x 7.2cm Length 4mm Diameter Twist Bits Drill Tip $11.00 |
|
|
13) Disston 11/64″ Drill Bits HSS , Jobber Length # 5442 New $6.50 |
|
|
15) Disston 7/16″ Drill Bits HSS , Jobber Length # 5449 New $10.00 |
|
|
DEWALT METAL DRILL BITS 1/16 INCH 1 7/8 LENGTH NEW 10 COUNT $5.99 |
|
|
T30 T-30 TORX 6 point Star Bit 1/4″ hex shank 1″ length wholesale 250 drill bits $49.99 |
|
|
CHICAGO-LATROBE 49526* 13/32″x7″ LENGTH HSS DRILL 72509 $2.00 |
|
|
12mm Diameter 150mm Length Hammer Masonry Drill Bit $4.44 |
|
|
100mm Flute Length 13mm Dia Helix HSS Twist Drill Bit $6.54 |
|
|
Irwin 5/64″ Titanium Jobber Length Drill Bit 63905 3pk $20.99 |
|
|
Irwin 7/64″ Titanium Jobber Length Drill Bit 63907 3pk $20.99 |
|
|
Irwin 1/8″ Titanium Jobber Length Drill Bit 63908 3pk $20.99 |
|
|
Irwin 9/64″ Titanium Jobber Length Drill Bit 63909 3pk $16.99 |
|
|
Irwin 5/32″ Titanium Jobber Length Drill Bit 63910 3pk $16.99 |
|
|
Irwin 11/64Titanium Jobber Length Drill Bit 63911 3pk $17.99 |
|
|
Irwin 3/16″ Titanium Jobber Length Drill Bit 63912 3pk $15.99 |
|
|
Irwin 13/64″ Titanium Jobber Length Drill Bit 63913 3pk $18.99 |
|
|
Irwin 7/32″ Titanium Jobber Length Drill Bit 63914 3pk $18.99 |
|
|
Irwin 15/64″ Titanium Jobber Length Drill Bit 63915 3pk $19.99 |
|
|
Irwin 1/4″ Titanium Jobber Length Drill Bit 63916 3pk $18.99 |
|
|
Irwin 9/32″ Titanium Jobber Length Drill Bit 63918 3pk $22.99 |
|
|
Irwin 5/16″ Titanium Jobber Length Drill Bit 63920 3pk $22.99 |
|
|
Irwin 11/32″ Titanium Jobber Length Drill Bit 63922 3pk $28.99 |
|
|
Irwin 3/8″ Titanium Jobber Length Drill Bit 63924 3pk $31.99 |
|
|
Irwin 13/32″ Titanium Jobber Length Drill Bit 63926 3pk $38.99 |
|
|
Irwin 7/16″ Titanium Jobber Length Drill Bit 63928 3pk $41.99 |
|
|
Irwin 15/32″ Titanium Jobber Length Drill Bit 63930 3pk $50.99 |
|
|
Irwin 1/2″ Titanium Jobber Length Drill Bit 63932 3pk $50.99 |
|
|
Lot of 4 Hitachi BlackGold Extended Length 5/16″ Drill bits $48.00 |
|
|
Lot of 3 Hitachi BlackGold Extended Length 5/16″ x 12″ Drill bits $30.00 |
|
|
Lot of 2 Hitachi BlackGold Extended Length 3/8″ x 12″ Drill bits $30.00 |
|
|
Lot of 3 Hitachi BlackGold Extended Length 1/4″ x 12″ Drill bits $30.00 |
|
|
Lot of 5 Hitachi BlackGold Extended Length 1/4″ x 6″ Drill bits $60.00 |
|
|
Lot of 5 Hitachi BlackGold Extended Length 1/8″ x 6″ Drill bits $60.00 |
|
|
Hitachi BlackGold Extended Length 1/2″ x 6″ Drill bits $20.00 |
|
|
DEWALT BITS FOR DRILLING 1/2″ WITH 3/8″ SHANK 5 INCH LENGTH NEW HSS BIT 2 COUNT $0.99 |
|
|
2.2mm Dia 53mm Length HSS Metal Twist Drill Bit 5 Pcs $3.77 |
|
|
Irwin Hammer Drill Bit 9/16″ Twist Length- 18″ Overall Length- 23″ $44.99 |
|
|
120mm Length Flute Stone Masonry Drill Bit Power Tool $7.34 |